Hi folks
Thanks for reading, Ive got a problem and was hoping for some help
The saddle on My m300 has suddenly stopped moving when using the apron hand wheel. All works ok with power feed but nothing on the handwheel. The wheel isnt pulled out/disengaged and you can hear movement inside the apro but no movement. Any advice appreciated!
Thanks again
Bob
Thanks for reading, Ive got a problem and was hoping for some help
The saddle on My m300 has suddenly stopped moving when using the apron hand wheel. All works ok with power feed but nothing on the handwheel. The wheel isnt pulled out/disengaged and you can hear movement inside the apro but no movement. Any advice appreciated!
Thanks again
Bob
