TOS SN-50C Power Feed Problem
I have a TOS SN-50C that the power feeds quit working. The rapid feeds still work. I couldn't find any help in the manual. I didn't see any thing obviously wrong the feed shaft is still turning. I...
View ArticleGraziano 180 questions and English manual?
Hello everyone I just a got a SAG 180 and got her dialed in but Im new to lathe work and can't read Italian. I was able to locate the manuals for both the SAG 180 and 14 but they are vague at best to...
View ArticleAny of you guys good at adjusting Graziano clutches SAG 180?
Ive read the manual and tried to adjust the clutches but I think Im making it worse or missing something. I warm the machine up and loosen the screw on the adjustment nut and tighten it a small amount....
View ArticleSchaublin 70 for sale
Schaublin 70 for sale-excellent condition has most accessories including overhead drive with speed control contact-entoffice@aol.com
View ArticleClik here to view.
Refurbished Schaublin 125
Hello, There. This is my refurbished Schaublin 125C. I bought it at an auction in very poor condition. It was completely desassembled, cleaned, painted and reassembled. Attached Thumbnails
View ArticleDrug home a Tug 40 from the scrapyard
Been looking for a better, bigger lathe and found a Toolmex, 1990 Andrychow Tug 40, 17.5" tool room lathe at the scrapyard. Surprisingly 'looks' in pretty good condition. Rare to see any usable manual...
View ArticleClik here to view.
Leinen DLZ140 adjustable needle bearing RNA4914S
I have a Leinen DLZ 140 right now and had instructions of how to adjust the front and back spindle bearing I could not figure out how it worked untill I googled for the bearing and found this drawing...
View ArticleColchester chipmaster questions
Hello. Is this the right place to post re:Colchester lathes? I'm just getting ready to move a Chipmaster into my shop. In the manual it says to never use the lead/feed screw reversing lever with the...
View ArticleClik here to view.
Whacheon HL460 DRO Installation?
I bought a new Newall DRO for my 'new' HL460 lathe. This has a 10" travel on the cross slide. It's the DP1200 system with the slim (about 5/16" diameter) carbon fiber rod type slide for the Y axis. I...
View ArticleNew Weiler Praktikant VCD and Commodor VCD lathes.... any idea of pricing ?...
YouTube Would be interesting to know the GSD version (standard DRO versions) pricing as well.
View ArticleClik here to view.
Schaublin W25 collets to trade
I've got a bunch of extra Schaublin w25 metric collets which I'd like to trade for some sizes that I am missing. These are for a Studer cylindrical grinder. They look bad but still hold parts...
View ArticleClik here to view.
Making a face plate for a Boley 4LV lathe
I have never seen a face plate for the Boley 4LV come up for sale, so decided to make one. I didn't take any photos of the back yard casting, but here is the result and a video of the machining. Mark...
View ArticleClik here to view.
Boehringer vdf due 560
Hi, accidentally got this Boehringer VDF DUE 560 lathe. Seems to me that clutch needs some adjustment - I can not change gear without turning of motor, spindle starts and stops properly. Also need some...
View ArticleSchaublin 150 vs Colchester Master vs3250
Hi all, I am utterly indecisive as I have the opportunity to get an out of the box new Colchester Master Vs 3250 with all the bells and whistles or a Schaublin 150 that is in a very good shape....
View ArticleSource for electromagnetic clutches and brakes for Graziano SAG12 AO
This compagny has a vast stock of electromagnetic clutches and brakes for European machine They advertise with clutches for the SAG12 particily I do not know if I mentioned these before clutches and...
View ArticleGraziano sag 14
I want to buy a heavier lathe than what I have at the moment.There is an sag 14 going for $3800.It is about 100 km from me. To check a lathe like this what should I look out for ?It does not have a...
View ArticleDrive replacement on Caz HB 575?
Has anyone here retro-fit a different drive motor into a Cazeneuve HB575? Looking at one that's missing it's motor and am leaning toward a total electrical / drive retrofit, retaining the original...
View ArticleClik here to view.
Schaublin 102-80 screw cutting attachment and VFD for existing 2 speed 3ph...
I bought a 102-80 last year and it's in pretty good order, it included the rear mounted screw cutting attachment in pieces which I've almost figured out although it only came with one "Star shaped...
View ArticleSag 180 TDI measurements
Could some help me with the dimensions of the thread dial indicator gea and its thread pitch. I know I dont need one to cut threads but Im looking for a project to do. I can see that the feed screw...
View Article