Graziano Sag 12 Joystick wiring and internals question and info request
In my ongoing efforts to get this lathe running again, I pulled the transmission and motor assembly out. I tested the motor and it spins nice and quiet. Turning over the transmission by means of the...
View ArticleGraziano SAG 14 leveling feet/bolts
I want to move my Graziano lathe to my new workshop, but it came without the leveling feet/bolts. There seem to be two versions of this, one with two holes: one for the leveling feet (just a bolt) one...
View Articlehelp with Harrison CNC lathe
I picked up a used Harrison Alpha 330T CNC / manual lathe recently. This machine is the Alpha only control not the dual control of the better models. I knew about this controls limitations but thought...
View ArticleSchaublin 102VM Lathe and 13 mill restoration project
Hi Guys, Two weeks ago, I bought a Schaublin 102VM Lathe and a Schaublin 13 mill. Very happy about that because it’s a nice combination of quality machines. Both machines need restoration work and I...
View ArticleSmart and Brown 1024
In case anyone is interested I have started a thread on scraping the bed on a S&B 1024 in the scraping forum Cheers Peter
View ArticleW25 Inch-Size Collets Available for Schaublin and Habegger
I have a few spare W25 collets in inch sizes: 1/2", and some quarters, eighths and a few sixteenths. Please get in touch via PM and let me know what you need. All collets are in good used condition....
View ArticleLeinen MLZ4S
Greetings I have picked up a Leinen LZ4S. It is missing quite a few bits: Chuck Tailstock The drivetrain gear that goes between the motor and the main drive belt. If anyone has any of these for sale or...
View ArticleVDF v630 mechanical help?
So, I got me a new lathe. VDF v630 that has been sitting still for the past 10 years so the first thing before I could start running it was to clean it good and get all the rust out. I decided to do...
View ArticleSchaublin 102-VM, W20 or W25?
Hello, I'm in the process of buying a Schaublin 102-VM and have found two machines that look promising. The machines are from the same year and look to have about the same wear. The W25 version have...
View ArticleIdentify Mystery items w/ Schaublin lathe
I just bought a Schaublin 102 lathe and the guy included a toolbox full of very high quality parts that do not go with the lathe. The pieces have that silky smooth feeling when you turn the cranks. The...
View ArticleGraziano Sag 12S Stopped Working
Hello all, We have a Graziano Sag 12S at the shop, and when shifting into the lower gears, the lathe suddenly shut off, and now we cannot get it to start back up. Pushing the power button does not turn...
View ArticleWhacheon WL580x2000 Shift Problems
I got in a Whacheon WL580x2000 from 1987 with very little use on it. Problem is that it only shifts though 3 gear ranges and not the full 6 speed ranges. It has a rotary crank speed changer which the...
View ArticleSource of tiny V belts for Schaublin 102N-VM besides Schaublin ?
The power feed drive belt needs replacement.... only 4.5mm wide, dept of V perhaps 3.5mm. aprox 500mm outside length.
View ArticleSchaublin parts, accessories and machine suppliers - results from a Google...
I thought I would post my search findings here in case anyone, particularly those in the US, can use this information. I have done business with two of the following and I know nothing about the...
View ArticleSchaublin 70. Horisontal distance from bed edge to spindle center
Hi, I wounder what the nominal distance id from the edge of the bed to the spindle center. I did a quick measurement using a angle plate with unknown precision and got it to 26.2-26.3mm. Seems a bit...
View ArticleSmt pullmax?
Anyone heard or have experience with this lathe or have an idea of what its worth? Swedturn 14 with SMT CNC 220 Programming Dual turret 2 axis with evacuation conveyor Complete with manuals and tons of...
View Articleneed help on a vdf lathe
hello, My name is Robert from holland, and i bought a old vdf lathe. i bought this lathe for 800euro's (dont know if that is a good price?). But i have trouble finding information about it. Maby on of...
View ArticleOkuma LK manuals required
I recently purchased an Okuma LK toolroom lathe and I'm looking for the operations and parts manuals, wondering if anyone here can help out with pdf versions please? Thanks for any help offered. Cheers...
View ArticleWeiler LZD220 as first lathe?
Hi there, I have wanted to buy lathe for almost 10 years now but haven't got around to buy one due the usual reasons (space, money, time) but now I think time is ripe. My needs are mostly making...
View ArticleSchaublin 70 Part Wanted
I require a part for a Schaublin 70 Tailstock, I think this part is shared with the headstock also so if you have something that looks like this it will probably do the job for me, if the pick did not...
View Article