How high will this Schaublin 125 CCN go?
Drehmaschine Schaublin | eBay Ends in less than 2 hours. One crappy picture, no further info, except that it works, but needs parameters reloaded (?). Looks well used/abused. Total disaster purchase or...
View ArticleHBX-360-BC Return to service
Hopefully, not a terribly lengthy project, as it is in better shape than expected. Plan is to JF USE it. Serial numbers when I can do. Meanwhile, this is the former Procyon Machine one discussed in...
View ArticleClik here to view.
Eccentric turning device for lathe
Hello, Does anybody know the eccentric turning device as seen on the picture? (sorry for the poor quality, but its the only one i found on the internet) I am interested where this chuck can be...
View ArticleSchaublin 70 for sale
Schaublin70 with all accessories for sale if interested email entoffice@aol.com and put Schaublin 70 for sale in subject
View ArticleClik here to view.
Mystery compound rest/top slide on Weiler lathe
I came across this Weiler Matador lathe for sale that seems to have a compound rest/top slide that is not original to the machine, as far as I can tell. I'm waiting to hear back if the current owner...
View Articleemco ecomat 17D
Does anyone have any idea of the base price of this lathe? Emcomat-17 D: EMCO lathes and milling machines for CNC turning and milling dee ;-D
View ArticleManual Wanted - Hyd tracer duplomatic TA55
Hi... Anyone happen to have a manual and care to scan or can point me in the right direction where to find one? Posted this in the General section first but no luck, thought I try here also just in...
View ArticleWhat standard does Schaublin use for what they call ISO 30 Spindles
As far as I can tell there is no such standard in ISO as ISO 30. There is ISO 297:1988 (7/24 tapers for tool shanks for manual changing) which looks close from what I can see without buying it but the...
View ArticleClik here to view.
Need help on a Leinen Lathe please
Hello, My buddy has a Leinen LZ4S lathe that has been a bit too hot. At least that is what I think... The spindle in the headstock is turning too heavy after he had turning nylon for hours... Probably...
View Article1950's ? Schaublin 102TO, a couple of questions
Just picked up a Schaublin 102TO from most likely the 1950's (sn# 110104). It has the back-geared headstock set up for the W20 collets, the 150mm compound and the "sightglass" style tailstock. If I...
View ArticleSchaublin? Please help me identify this dividing head.
Hi. Can anyone please help me identify who manufactured this dividing head and a possible model number? The plastic hand wheel leads me to believe its manufactured by Schaublin. Thanks. Sam Flickr:...
View ArticleClik here to view.
Schaublin 102 grinding carriage
I figure I'll start a thread just to discuss this accessory. Digging around, the grinding carriage for the Schaublin 70 seems to be fairly common, I have so far only found one other example sized for...
View Articlegraziano sag 12 speed control switch
the 5 position switch on the joystick failed. It is a Salzer sg 121.Anyone have an idea where to get a replacement?I was going to mount a 5 position switch on the headstock panel and just select speeds...
View ArticleHello!
Hi everyone, Im very new here. I have been reading a few threads concerning watchmaking lathes. I apologize in advance as I realize this is probably in the wrong section, however I dont know where...
View ArticleSchaublin 135 MT5 to B32 adapter ejection thread
Does anyone know what the actual size of the adapter thread is? It looks to be a bit under 52mm and 1.25mm pitch but I am having trouble matching it to make a new ejector ring. I don't have thread...
View ArticleSchaublin 135 belts and the dancing variator
I think I need to replace at least the lower belt on my 135. It spent a long time good and soaked with oil and seems kind of soft and cupped. I don't actually know this is an issue but something is...
View ArticleMori MS-1250G apron oil pump question
Hello, Happy Thanksgiving! I have a Mori MS-1250G lathe that is not pumping oil up from the apron into the cross slide as I believe it should. See the attached video. I am trying to determine my next...
View ArticleClik here to view.
Sl-2 spindle drive retrofit wiring
I HAVE A MORI SL-3 WITH 2000GII CONTROL manufactured in 1991, The spindle drive control failed and we had to remove it and ship it out to be repaired. The individual who removed it did not make a...
View ArticleAi hemburg dr1 documentation
I was searching for all sorts of documentation about this Hembrug AI, but seems to be very difficult to get? Is there somebody on this forum who can help me with documentation about these lathes? Hope...
View ArticleClik here to view.
Lorch B-VI-PO-K
Hey guys, I'm not sure that ink posting in the appropriate area. If not please let me know. I've Been after a small precision lathe for screw cutting and general turning of parts for my hand made...
View Article