Schaublin 160 in New York looking for a new owner
In trying to locate documentation for my older 160 I was following up a lead and found a 160 in New York (Long Island). This machine is in storage and has been for some years. I have no pictures or...
View Articlestar wheel tailstock, has anyone made one?
the star wheel tailstock on Schaublin lathes is THE hot setup if you listen to anyone who has one, it seems they should be more common, no? given that they are not frekin' rocket science, why are they...
View ArticleSchaublin Geras
Hi everyone, Dose somebody have Schaublin polygon gears ? Need 25,30,45,50,55,60,70,76,100,120,125 and 127 teeth .
View ArticleAll what you ever wanted to know about the Schaublin 102N-VM
You'll discover in that thread. It's in french, but the pictures will speak for themselves, and the author speaks a perfectly fluent english, should you want to contact him (not to mention he's a PM...
View ArticleTread weiler condor
Hello, I have a lathe Weiler Condor vs2 the problem I have is with cutting threading, settings lathe based on the table do not match. gears that I use is 120t 21t 28t if I want to do a thread 1,75mm...
View ArticleSchaublin Geras
Hi everyone, Dose somebody have Schaublin polygon gears ? Need 25,30,45,50,55,60,70,76,100,120,125 and 127 teeth .
View ArticleAll what you ever wanted to know about the Schaublin 102N-VM
You'll discover in that thread. It's in french, but the pictures will speak for themselves, and the author speaks a perfectly fluent english, should you want to contact him (not to mention he's a PM...
View ArticleTread weiler condor
Hello, I have a lathe Weiler Condor vs2 the problem I have is with cutting threading, settings lathe based on the table do not match. gears that I use is 120t 21t 28t if I want to do a thread 1,75mm...
View ArticleMori Seiki MS-850 versus Victor 1630 versus Bridgeport Romi versus ...
I'm looking for a smallish footprint and reliable, stout lathe to put in my garage. Not looking to start a lathe flame/religion war :-) Footprint max size I want is about 3'x8' with a little wiggle...
View ArticleSchaublin 70 for sale.
I've a Schaublin 70 I think I'd like to sell. Its in good shape, comes with 35 collets, 3 jaw, OEM overhead drive and collet closer. Lever action tailstock. Located in Toronto. I'd like to avoid...
View ArticleSchaublin headstocks- plain or roller?
A recent ad got me to thinking. I've had a prejudice for years against plain bearings in lathes due to speed limitations in moderate to bigger sized lathes and fact that I don't have the skill to...
View ArticleSwiss and German machine tool literature library - website
I have tried to add this to PM 3 times...hopefully the 4 is the charm. I found this site by accident this AM... Swiss machine tool literature library Swiss machine tool literature library - Anglo-Swiss...
View ArticleClik here to view.
Celtic (Mondiale) 14 lathe controls
Hi everyone, I just picked up a good condition Celtic 14 lathe, made in Belgium by Mondiale. It's the older of the two styles I've seen, but haven't found a serial number yet to date it. I got hold of...
View ArticleIkegai AM-20 vs A20
I can not for the life of me find any information on the AM-20. I have noticed 3 additional knobs on the AM-20 compared to the a-20. any information would be appreciated.
View ArticleClik here to view.
Mondiale lathe levelling screws
Hi all, I've cleaned up and oiled the Celtic (Mondiale) 14" lathe, and put power to it. Made a few test cuts, and it runs very nicely. I'd like to level it next, and I'm wondering if the 4 screws...
View ArticleNeed help with installing Forkardt chuck onto Schaublin 135
Hello, I'm a fresh new owner of 1967 Schaublin 135. When bought F160/D4 Forkardt chuck was included. As stated I have troubles with installing it. I have never used D4 camlock chuck before. I don't...
View ArticleWanted: Schaublin 135 change gear [64]
Howdy All, Looking for a [64] tooth change wheel for Schaublin 135. I have an extra [79] in case anyone needs one/wants to trade. Kind Regards, Don
View ArticleClik here to view.
Emergency Help Smart & Brown 1024 VSL ...
I was offered to buy a lathe in excellent condition. Year 1983 was very little in operation from outside just refreshed with new paint. Does not have much equipment with him. The price is 10.000 euro....
View ArticleExperience with Seiger lathes?
Im looking at buying a used Teach in lathe. Ive looked at a german Seiger SLZ500 , but there are hardly no information online. Are they a good manufacturer? I have also looked at the weiler E50, but...
View ArticleClik here to view.
Latheasaurus Rex our first lathe a Voest DATR 1.5
We finally landed our first lathe, an old Voest DATR 1.5, for us a monster as we had been looking at old SB etc which were half the size, but it crossed my path yesterday, the price was right and I...
View Article