Clik here to view.
Prvomajska Tg 125 Tool room Lathe users experience etc
Prvomajska Zagreb Croatia a indusrty lathe weight a one ton,spindle 38mm with draw bar and set of metric collet,duplomatic copy with revolver tale Higt 125mm center distance 500mm etc in very good...
View ArticleLooking for operators manual or some help operating Voest DAT lathe
HI all, As you may have seen in my other post, Lathesaurus Rex, I have acquired a Voest DATR-1.5 lathe and have it all cleaned, lubed and operating, but as this is my first lathe, and the service...
View ArticleWhere in Germany, Switzerland, and the Netherlands > Museums, used machinery...
My son is traveling in Europe and will be in Germany, Switzerland, and the Netherlands. What are some recommendations for used machinery dealers, Schaublin, Deckel, etc? What about museums with...
View ArticleClik here to view.
Schaublin 135 belt change
I have a Schaublin 135 which needs new belts, they've worn and stretched now to a point where they aren't functioning correctly, and an oil leak on the countershaft probably hasn't helped. I've...
View ArticleClik here to view.
Unusual Spindle on Schaublin 120 TO (plain 120)
This lathe as the thread chasing arrangement where by the chaser moves the whole spindle in and out. Does anyone have an understanding of how this works? What are the bearings - a plain bearing that...
View ArticleClik here to view.
Okuma LK accessories wanted
I own a very nice Okuma LK tool room lathe, the size is 14 x 32. Does anyone have any leads on where I might find fixed and traveling steadies for this lathe please? Unfortunately there were no...
View ArticleEarly vs late Schaublin 13
Hi, Im looking into buying a Schaublin 13 milling machine that came up in my area recently. The price is fairly low (a half or third of what I would need to pay for a decently looking Deckel here,...
View ArticleWeiler Ergodor lathe owner's manual
As per title, does anyone have PDF files or know of links to download the literature for an Ergodor lathe? Thanks, Ger
View ArticleDripfeed Fanuc 20-T
Hello, I have some questions about a Fanuc 20-T.This control is mounted on a Schaublin CCN125 from aprox.1995. We purchased a PCMCIA 6mb Sram card to run NC programs from this card. In MDI mode this...
View ArticleABCD selector on Meyer EMCO Maximat V13 Lathe question
How many gears are controlled by this selector and how many gears may be damaged if a lathe has this selector disabled. How impossible is the repair associated with this selector would be? I have the...
View ArticleClik here to view.
Weiler Matador Unknown Part
Hey everyone. I'm new to the forum as my friend and I just purchased an old Weiler Matador VS lathe. Everything seems to be in good working order but we found some broken metal bands that are...
View ArticleWeiler 160 CNC disassemble power chuck
Hello to everyone. I need a little help. I want to replace collet chuck with 3-yaw classic chuck on old weiler 160 CNC with siemens 3T controller. Problem is that I must also replace push/pull barrel,...
View ArticleStettler OD/ID Grinder
Do any of our Swiss friends have a manual or even a catalog for a Stettler OD/ID grinder. There seems to be two models a 60-110 and a 64-110 Thanks! Todd W
View ArticleH. Ernault-Somua (HES) Acc 300
Yesterday I helped a friend get the wiring (3 phase from a convertor) sorted out and his new to him lathe running. Allegedly the lathe has always been used to cut wood to make judicial gavels, and he...
View ArticleSchaublin 102 rear spindle diameter
Hello, Does anyone know what is the diameter of the rear part of the spindle for the Schaublin W20 headstock? (more exactly, the rear part of the spindle where accessories such as dividing atachment...
View ArticleWeiler Matador Headstock Alignment
I followed the instructions laid out in the manual and by the following thread: https://www.practicalmachinist.com/v...please-289495/ I can't seem to get my alignment any better than .008". I loosened...
View ArticleCazeneuve HB 725 opinions
Hello, a friend of mine is looking for a manual lathe with large spindle bore 70-100mm (3"-4") and small footprint, a bar is going to be fed through the head stock and basically tubes made from 50-60mm...
View ArticleNeed Flat drive belt for Swiss Sixis Machine, 18mm wide x 620mm long, 1.5 thick
We are looking for a source for these belts. Thanks
View ArticleClik here to view.
New (novice) owner of Schaublin 102-VM with a couple of questions
Hi all, I'm the new owner of a Schaublin 102-VM (1953 model) which I've inherited. It seems to be in good condition and is very complete with many accessories, including a vertical milling attachment....
View ArticleClik here to view.
Fritz Kern KG D18 L Lathe: Looking for any written Information or Manual
Hello to the PM World, my Name is Wolf and Im from Germany.Im 34 Years old and doing Car Repairs as a Hobby for nearly all my Lifetime;-) To expand my Possibilities, I bought a well used Industial...
View Article